Preasure Based Kit
The kit comes with a digital controller that is usually installed in the trunk near the air bottle and compressor. Sensors are built into the controller and display the pressure in the bottle and bags on the remote or mobile app. The mobile application uses a bluetooth module. The biggest advantage is that the controller allows 3 preset pressure levels to be set. Each level represents pressure settings in the 4 bags. The convenience of this is that with the push of a button, the car lies on its stomach on the ground or becomes as high as an excavator.
Includes:
- Compressor
- Bluetooth Module
- Air Bottle
- Water Trap
- Mobile App
- Digital Controller
- Installation Instructions
- Air Tubes, Bolts and Cables
- 3 Levels of Pressure Presets
- Valve block for air (when the system is disconnected, the bags still have air)
Grinds Controller
Digital controller with 4 bags and remote/mobile app.
Individual control allowing each bag to be raised independently of the others. There are 3 levels of pre-configuration pressure as well as the option of manual adjustment via the remote/mobile app. The configuration levels allow for easier lowering/raising of the vehicle, or in other words the push of a button lowers the car to the ground or lifts it up like an excavator.
AirLift 3P Controller
Digital controller with 4 bags and remote/mobile app.
Individual control allowing each bag to be raised independently of the others. There are 3 levels of pre-configuration pressure as well as the option of manual adjustment via the remote/mobile app. The configuration levels allow for easier lowering/raising of the vehicle, or in other words the push of a button lowers the car to the ground or lifts it up like an excavator.